Technology
1 min read
Airtech and Alpha Additive printed a 3,000-pound structure using Dahltram T-100GF recycled resin.
Airtech Advanced Materials Group
Materials
Originally reported by 南极熊
Airtech and Alpha Additive printed a 3,000-pound structure using Dahltram T-100GF recycled resin. This 1,360kg milestone featured 60-degree overhangs, surpassing the stability limits of 3-axis gantry systems. The success proves recycled composites are viable for high-performance industrial tooling. This signals a systemic shift toward cost-effective, circular manufacturing in the LFAM sector. 🌍 #LFAM #Sustainability #3DPrinting #Manufacturing #Engineering
This article is an AI-assisted rewrite of the linked source report. Facts originate from the source; phrasing is AMPulse's. Use Read Original below to verify, or Report an issue if something is wrong.