Skip to main content
Xinbochuan is scaling high-performance footwear production with proprietary PEBA materials, achieving rebound rates over 75% and densities as low as 0.4g/cm3.
Technology
1 min read

Xinbochuan is scaling high-performance footwear production with proprietary PEBA materials, achieving rebound rates over 75% and densities as low as 0.4g/cm3.

Xinbochuan Material Technology Co., Ltd
Xinbochuan Material Technology Co., Ltd

Materials

Originally reported by Panda3DP

Xinbochuan is scaling high-performance footwear production with proprietary PEBA materials, achieving rebound rates over 75% and densities as low as 0.4g/cm3. This technical milestone allows 3D printed midsoles to match traditional foams while offering superior fatigue resistance. By integrating these materials into automated workflows, manufacturers are slashing lead times by 60%. This shift signals a move toward a digital, localized footwear supply chain. 👟🚀 #3DPrinting #AdditiveManufacturing #FootwearInnovation #Sustainability

This article is an AI-assisted rewrite of the linked source report. Facts originate from the source; phrasing is AMPulse's. Use Read Original below to verify, or Report an issue if something is wrong.

Explore Xinbochuan Material Technology Co., LtdRead Original

How This Connects

6 related events
  1. Same pattern

    Yingpu 3D launches SLS PEBA technology for mass footwear production

  2. Same pattern

    Open Bionics fits first 3D printed full-length bionic arm using Hero FLEX system

  3. Same pattern

    CRP USA to showcase 3D printed Windform parts for drones, aerospace, and motorsports at XPONENTIAL 2026

  4. Same pattern

    Adidas Unveils First Fully 3D-Printed Soccer Cleat Using SLS Technology

  5. Same pattern

    Adidas unveils first SLS 3D-printed football boot, monocoque construction eliminates assembly

  6. Same pattern

    Nike and Zellerfeld launch next-gen 3D-printed Airmax 1000.2 footwear

  7. This article

    Xinbochuan is scaling high-performance footwear production with proprietary PEBA materials, achieving rebound rates over 75% and densities as low as 0.4g/cm3.