Arakigumi
Okayama general contractor that designs and builds civil and architectural works and has installed 3D-printed concrete parts on river-embankment projects.
- CEO / Founder
- Raita Araki
- Team Size
- 201-500
- Stage
- Established
Technology & Products
Key Products
General contracting for architecture and civil engineering; in-house design under the AZUR100 brand; property management (from 2019); town-development produce (from September 2026); ICT construction and BIM/CIM; installation of construction-3D-printed concrete components, including an embankment end-stop and pedestrian stairs.
Technical position · AMPulse analysis
Printed members are made from 3D data away from the job and then set in place, so complex formwork, site pouring and curing leave the site schedule. On its first printed component, the company said a special layered mortar matched or exceeded ordinary concrete strength and was accepted by the client, with usable strength in about three days. The October 2026 stair release does not name the printer, mix or print shop. Company media shows Nishio Rent-All operating the construction printer and supplying printed members for Arakigumi civil work.
Differentiation
Value Proposition
Designs and builds buildings, civil infrastructure and town-development projects in Okayama and nearby prefectures, and uses off-site 3D-printed concrete members where they can shorten site formwork, labor and schedule.
How They Differentiate
A regional general contractor that uses printed concrete parts inside its own civil contracts and compares them with cast-in-place work on quality, crew size and schedule. Design and construction management stay with Arakigumi. The printer is used through a rental operator rather than as equipment Arakigumi sells.
Market & Competition
Target Customers
National and local public agencies, and private owners of buildings, medical and welfare facilities, schools and infrastructure, mainly in Okayama Prefecture and Hiroshima Prefecture.
Industry Verticals
Civil infrastructure; public works; buildings; healthcare and welfare; education; urban development
Competitors
Ohmoto Gumi; Aisawa Kogyo; Naikai Archit
Growth & Milestones
Growth Metrics
Revenue ¥19.5 billion for the year ended June 2026; ¥26.5 billion (June 2025); ¥19.9 billion (June 2024); ¥19.0 billion (June 2023), from the company recruiting profile. Employees 237 at 30 June 2026. Capital ¥100 million. Average tenure 16.6 years (FY2026 figure on the same profile).
Major Milestones
1 April 1921: Kiyoshi Araki founded the business. December 1960: incorporated. November 1972: Yuichiro Araki became president (company recruiting history). August 1998: Raita Araki became representative director. September 2010: Raita Araki became chairman and president. October 2015: AZUR100 design brand. April 2019: property-management business. 1 April 2021: 100th anniversary. By April 2026: first construction 3D-printed component, a block end-stop, on the Asahi embankment. September 2026: town-development business. 7 October 2026: installed 3D-printed concrete stairs about 1.9 m wide and 1.5 m high on the Asahi River embankment in Marunouchi, Okayama.
Notable Customers
MLIT Chugoku Regional Development Bureau Okayama River Office (FY2025 Asahi River Uchisange embankment works); Okayama Prefecture; Okayama City; Chugoku Electric Power; The Chugoku Bank; Okayama University