Skip to main content

FlexCycle Solutions

MaterialsFreiberg, Germany· One of 1025 Materials companies tracked by AMPulse

Pre-incorporation spin-off project at TU Bergakademie Freiberg that makes recycled copper powder for additive manufacturing and powder metallurgy by a mechanical process, without melting.

CEO / Founder
Julius Eik Grimmenstein (Designated CEO)
Stage
Early Stage
Latest Round
Grant
Key Investors
Sächsische Aufbaubank; Freistaat Sachsen; European Union (ERDF); EXIST

Technology & Products

Key Products

Six recycled copper grades, all stated above 99.9% copper and from 100% recycled feedstock: FCP-20 (<20 µm, sinter pastes and contacts); FCP-BJ (20–45 µm, binder jetting); FCP-AM (20–63 µm, LPBF and DED; oxygen ≤400 ppm; Hall flow about 14 s/50 g); FCP-EBM (63–100 µm, electron beam melting); FCP-Si (45–150 µm, spark plasma and pressureless sintering); FCP-PM (20–150 µm, press-and-sinter). Custom size cuts on request.

Technical position · AMPulse analysis

The process runs below 100 °C at about 650 kWh per tonne, with no inert gas, chemicals or water, against a stated 9,000 kWh per tonne or more for gas atomisation. The project states the rough spheroidal surface absorbs about twice as much 1070 nm laser light as gas-atomised powder and raises green strength in press-and-sinter use.

Differentiation

Value Proposition

Copper powder from thin-walled production residues and electronic waste, made below 100 °C without melting or inert gas, at about 650 kWh per tonne, for laser powder bed fusion and powder metallurgy.

How They Differentiate

SCHLENK and cunova sell gas-atomised copper and copper-alloy powders, and Kymera sells copper powders for binder jetting, laser sintering and cold spray. FlexCycle starts from thin secondary copper, skips melting and inert gas, and sells a rough spheroidal particle it says absorbs infrared laser light better than smooth atomised powder.

Market & Competition

Target Customers

Industrial buyers of copper powder for laser powder bed fusion, directed energy deposition, binder jetting, electron beam melting, cold spray and press-and-sinter powder metallurgy, including makers of electronic parts, cooling structures and high-performance components.

Industry Verticals

Electromobility; power conversion; high-performance computing; electronics; powder metallurgy; additive manufacturing

Competitors

SCHLENK; Kymera International; cunova

Growth & Milestones

Major Milestones

2022–2024: CuprAlUp, a ZIM-funded project on fine copper fractions, with first laser-cladding tests. June 2023 and June 2024: German and European patent applications. 15 July 2025: validation funding from Sächsische Aufbaubank, Saxony and the EU (ERDF). 2025–2026: pilot plant at CircEcon in Lusatia. 10 November 2026: MDR Sachsenspiegel report. 19 November 2026: Formnext Sustainability Award, supported by Renishaw. December 2026–May 2028: EXIST research transfer to build a pilot line. 2028: planned GmbH in Chemnitz.